Blinding & Mass Concrete
Economical lean mixes for non-structural work, levelling and mass fill.
- Blinding layers under foundations
- Mass fill and kerb bedding
- Non-structural paving bases
Concrete Products
Standard and special ready-mix concrete, batched to specification and verified by our in-house laboratory.
Our range
The right mix for every pour.
Not sure which grade you need? Send us your drawings or specification and our lab team will advise.
General Purpose Concrete
A versatile mix for light residential foundations, driveways and general building work.
- Strip footings for houses
- Garden walls and boundary walls
- Pathways and driveways
Structural Concrete
The workhorse structural mix for reinforced elements in residential and commercial buildings.
- Reinforced foundations and ground slabs
- Columns, beams and suspended slabs
- Residential and light commercial structures
High-Strength Concrete
Higher-strength mixes for demanding commercial, industrial and infrastructure structures.
- Multi-storey frames and transfer slabs
- Industrial floors and heavy-duty pavements
- Bridges, water-retaining and infrastructure works
Pump Mix Concrete
Mixes designed for smooth pumping, delivered by the only built-in pump mixer fleet in Zambia.
- Upper floors and hard-to-reach pours
- Congested reinforcement
- Fast placement with our built-in pump mixers
Special & Admixture Mixes
Custom mix designs developed and verified in our Quality Control Laboratory.
- Retarded mixes for long hauls and hot weather
- Water-resistant mixes for basements and tanks
- High-workability and early-strength mixes
Quick comparison
| Product | Grade | Strength (cyl / cube) | Typical slump | Typical use |
|---|---|---|---|---|
| Blinding & Mass Concrete | C15/20 | 15 MPa / 20 MPa | 75–100 mm | Blinding layers under foundations |
| General Purpose Concrete | C20/25 | 20 MPa / 25 MPa | 75–125 mm | Strip footings for houses |
| Structural Concrete | C25/30 | 25 MPa / 30 MPa | 75–125 mm | Reinforced foundations and ground slabs |
| High-Strength Concrete | C30/37 – C40/50 | 30–40 MPa / 37–50 MPa | 100–150 mm | Multi-storey frames and transfer slabs |
| Pump Mix Concrete | Any grade | To specification | 100–150 mm | Upper floors and hard-to-reach pours |
| Special & Admixture Mixes | To specification | To specification | As designed | Retarded mixes for long hauls and hot weather |
Values are typical and for guidance only. Final mix designs are confirmed against your project specification.
Quality Control Laboratory
We test everything before it reaches your site.
Our Quality Control Laboratory is on site at the Lusaka plant. It checks the raw materials and verifies the finished concrete, with compression, sieve, slump, air-content and drying equipment, so every batch meets its performance, safety and durability standard before delivery.
Inside our lab
Sieve analysis
Grading of sand and stone so every mix gets the right aggregate blend.
Slump test
A workability check on fresh concrete before trucks are dispatched.
Air content
Air-entrainment readings for durability-critical mixes.
Compressive strength
Cube crushing at set ages confirms that each mix reaches its specified strength class.
Big pour or small slab, every build starts with the right mix.
Tell us your project location, grade and volume and our team will come back with a quote and a delivery plan.